Request a project
Benešl Automation / BAVIS / Smart house demo
Demo · BAVIS · Smart house

A smart house demo project on BAVIS

A two-storey family house that shows how BAVIS runs a smart home: lighting, shading, heating and cooling, ventilation, pool, PV with a battery and security in one application. It is not a real building. The house is a demo that runs entirely in simulation, so you can try it in your browser without a PLC or installation.

floors
2
rooms
18
scenes
7
house model
3D

What the demo house includes

  • DALI lighting with dimming and colour temperature, presence sensors and decorative LED strips.
  • External blinds with sun shading and retraction in wind.
  • A heat pump with domestic hot water, underfloor heating and cooling ceilings with dew point monitoring.
  • Heat recovery ventilation with automatic, manual, boost and away modes, also driven by CO₂.
  • A pool with filtration, heating and chemical dosing.
  • PV with a battery, energy metering and solar surplus routed to pool and hot water heating.
  • Security with zones, presence radars and window and door contacts.

In the project, the PLC handles security. Scenes, shading, retracting the blinds in wind and the PV surplus are controlled by BAVIS. In the demo the PLC is simulated.

How the project is built

  • One description of the house: rooms, building services and the PLC interface are in one place. It generates the BAVIS project with tags, alarms, scenes and schedules, the screens, the SCL source for a SIMATIC S7-1500 PLC and the 3D model map. A new room appears everywhere.
  • The floor plans of the demo house are drawn from its 3D model, and luminaires, sensors, heating circuits and cooling ceilings are placed from the geometry. For a real project we prepare the plans and elements from the design drawings; after a drawing revision the data is simply regenerated.
  • Virtual commissioning: the whole house runs in simulation without a PLC, so you can test screens, scenes and logic without hardware and errors are found before they reach the site.
  • The PLC interface is a data block whose addresses are calculated from the same description, without manual mapping. BAVIS can also read the energy meter, inverter and LED strips directly, without a PLC. In the demo all these values are simulated.
  • The demo uses the same BAVIS core as industrial projects: alarms, trends, permissions, backups and updates.

What you will see in the demo

  • A house overview on the plans of both floors with temperature, humidity, CO₂, consumption and heating views.
  • A room window on tap: temperature and setpoint, humidity, CO₂, light, blinds and a trend.
  • House modes home, away, night and holiday, and scenes for lights, blinds and the exterior.
  • Energy: flows between PV, battery, grid and house, and self-sufficiency.
  • A 3D model of the house linked to the values: layers for lighting, heating and cooling, ventilation, security and energy, and a fly-to for a room.

We also test on real devices

The demo runs on a simulation. But we also test BAVIS on real devices in an occupied flat, so far only by reading values – it does not switch or control anything. Which drivers have already run with a real device is shown in the overview on the page BAVIS 4.0.

Planning a smart house or building?

Try the demo house in your browser: screens, scenes and the 3D model on a simulation. Send us the design documents and we will propose a solution for your house.

Siemens, SIMATIC and S7 are trademarks of Siemens AG.