Water and wastewater
Water treatment plants, reservoirs, pumping and booster stations, sewers and wastewater treatment plants. Process control in the PLC, remote supervision of all sites from one place and the records the operator needs every day and once a year. The on-call operator gets the alarm on the phone and acknowledges it with a key press.
Typical tasks
- Wastewater plant and waterworks from day oneProject templates for a wastewater plant and waterworks with simulation: pumping stations, aeration, secondary clarifiers, sludge handling, treatment and reservoirs. The project does not start from scratch.
- Telemetry of remote sitesRemote pumping stations and reservoirs over Modbus, IEC 60870-5-104, DNP3 or MQTT via LTE or a fixed network. From 4.0 a site overview: last connection, signal, battery, 230 V mains, door and outages per month. Reading back data after a link outage in 4.x.
- Alarms and on-call dutyFrom 4.0 voice calls acknowledged by a key press (SIP PBX or GSM modem), SMS, e-mail and Telegram, escalation by the on-call rota and alarm areas by site.
- Operating log and inspection roundsFrom 4.0 an electronic daily operating log: values from the process fill in by themselves, the operator adds readings and notes and closes the day with a signature. Rounds with QR or NFC tags, missed checks in an overview and a monthly log in PDF and XLSX as records for operational reporting.
- Lab analyses, limits and reportsFrom 4.0 laboratory analyses by sampling point (manual or CSV and XLSX import), p and m limits and the annual average according to the permit, treatment efficiency and records for the annual report in XLSX. Night minimum and leaks in network zones, overflows and stormwater relief, specific energy consumption in kWh/m³ and chemical stock.
- Many sites, one overviewBAVIS Central for all of the operator's sites, backups, updates and service without a VPN, hot-standby redundancy for the control room. From 4.0 lab results via the API and events by webhook or MQTT to the ERP and the dispatch centre.
Services for this sector
What you get from us
A well-functioning plant is only half the job. The other half is making sure it can be looked after once handed over.
Clear program
Structured, commented code with consistent naming that your maintenance team or another supplier can understand.
Complete documentation
Operating manual, functional description, I/O list and parameters – clearly structured and in a consistent design.
Operator training
Operators and maintenance know how to run the plant and what to do in case of a fault before we leave.
Support after handover
We remain available for service, modifications and remote diagnostics. We know the plant, so we never start from scratch.
Let's talk about your project
Describe what you need. We get back to you within two working days with the next steps.