BALANS for electricians
A smart switch that installs like a switch. One box, labelled plug-in terminals and a manual behind a QR code right on the board.
We are testing the rev B prototype boards right now. Sales start once the safety, EMC and radio tests are finished. Until then we are looking for pilot installations.
Mounting
- A 68 mm wall box, verified with Kopos KPR 68-70_KA (70 mm deep). Modules with RJ45 need a depth of at least 60 mm.
- Plug-in terminals 5.08 mm (230 V) and 3.5 mm (SELV). You wire the plug on the bench and push it in. The terminals face the centre of the board, so the box wall does not block them.
- Labels on the board: every terminal is printed (L, N, OUT1, UP, DN, DA+ and so on) and the QR code leads to the manual of exactly that module.
- Steps: POWER module into the carrier, carrier into the box, CORE onto the 2 × 5 header, snap on the frame, insert the panel and the glass.
- The 230 V modules need a neutral wire. Where N is missing, use PoE or 12–24 V supply with the POWER Base or POWER PoE IO module.

Commissioning and service
Commissioning
After power-up the switch starts a setup Wi-Fi protected by the code on the label. In the web interface you select the panel and the module, set up the network and hand the password over to the customer. No output moves until a module is selected, so nothing switches by mistake.
Service
- Module swap: you replace a faulty or unsuitable module without replacing the whole switch.
- Backup and updates: settings backup and restore in the web interface, firmware updates over the web with automatic rollback.
- Support: technical support straight from the developer.
Partner programme
We are looking for electricians and installation companies who want to install BALANS from the start.
- Pilot installations at your customers' sites before sales start, trial operation by agreement.
- Partner terms on request and priority deliveries after launch.
- Training online with a mounting demo, plus a sample box.
- A listing on the website in the map of installation partners once sales start.
Safety and status
230 V modules may only be connected by a qualified electrician (in Czechia under Government Regulation 194/2022 Coll.). BALANS is at the prototype stage: ratings are preliminary and we will issue the declaration of conformity once the safety, EMC and radio tests are finished.
Be there when BALANS launches
We will e-mail you when the modules go on sale and, once in a while, a short note on how development is going. No spam.
BALANS is a Benešl Automation product, designed and developed in Czechia. Images are visualisations from the 3D model and the board design; parameters may change. The modules are not on sale yet: we will issue the declaration of conformity once testing is finished. Connection to 230 V mains may only be made by a qualified electrician. Home Assistant, ESPHome, Siemens, S7, Beckhoff, TwinCAT, CODESYS, DALI and other names mentioned are trademarks of their owners.